Počet záznamov: 1  

Granulometric analysis of chips from beech, oak and spruce woodturning blanks produced in the milling process using 5-axial CNC machining center

  1. NázovGranulometric analysis of chips from beech, oak and spruce woodturning blanks produced in the milling process using 5-axial CNC machining center
    Aut.údajeRichard Kminiak, Adrián Banski
    Autor Kminiak Richard TUZDFOD - Katedra obrábania dreva
    Spoluautori Banski Adrián TUZDFOD - Katedra obrábania dreva
    Zdroj.dok. Acta Facultatis Xylologiae Zvolen : vedecký časopis Drevárskej fakulty. Vol. 61, no. 1 (2019), s. 75-82. - Zvolen : Technická univerzita vo Zvolene, 2019
    PoznámkyLit.
    KrajinaSlovenská republika
    Heslá CNC obrábacie centrá - CNC machining centers * granulometrická analýza - granulometric analysis * triesky - chips * prachové imisie - dust pollutants
    AnotáciaGranulometric composition of chips resulting from the milling process of beech, oak and spruce woodturning blanks with the thickness of 25mm usinga single milling cutter and a CNC machining center SCM TECH Z5 is presented in the paper. Granulometric composition of chips is observed in the range of commonly used technological conditions for given type of the milling cutter such as feed rate vf= 1 to 5 m·min-1 and the thickness of removed layer e = 1, 3 and 5 mm. The fact that more than a half of the produced chips is a coarse fraction of fibrous chips with dimension more than1 mm can be stated following the granulometric analysis. Isometric grains, i.e. chips with approximately the same size in all three dimensions are formed from dust fractions smaller than 500 μm. There is, on average, 2.38 % of inhalable dust with particles smaller than 125 μm. The finding that no particles in respirable dust with the size smaller than <10 μmare formed can be stated.
    URLhttps://df.tuzvo.sk/sites/default/files/07-01-19.pdf
    Kategória publikačnej činnosti ADN
    Báza dátxcla - ČLÁNKY
    Druh dok.RBX - rozpis článkov z periodík
    OdkazyPERIODIKÁ-Súborný záznam periodika
    Zväzky2019: 1-2
    článok

    článok

Počet záznamov: 1  

  Tieto stránky využívajú súbory cookies, ktoré uľahčujú ich prezeranie. Ďalšie informácie o tom ako používame cookies.