Počet záznamov: 1  

Effects of hydrodynamic treatment of wood particles on mechanical properties of wood-polymer composites

  1. NázovEffects of hydrodynamic treatment of wood particles on mechanical properties of wood-polymer composites
    Aut.údajeSergei Kazitsin ... [et al.]
    Spoluautori Kazitsin Sergei
    Namyatov Aleksey
    Bayandin Mikhail
    Grotskaya Nina
    Zdroj.dok. Acta Facultatis Xylologiae Zvolen : vedecký časopis Drevárskej fakulty. Vol. 66, no. 1 (2024), s. 47-58. - Zvolen : Technická univerzita vo Zvolene, 2024
    PoznámkyLit.
    Jazyk dok.angličtina
    KrajinaSlovenská republika
    Systematika630*174.7
    630*839.811
    Heslá drevoplastové kompozity - wood-plastic composites WPC * hydrodynamické obrábanie - water jet machining WJM * smrekovec - larch - Larix Mill. * piliny - sawdust * mechanické vlastnosti - mechanical properties * ťahová pevnosť - tensile strength * ohybová pevnosť - bending strength * drevné častice - wood particles
    AnotáciaThis study is aimed to investigate the mechanical properties of wood-polymer composites (WPC) made on the basis of polylactic acid (PLA) with the addition of mechanically activated wood particles (WPs) from larch wood (Larix sibirica) in a mass ratio of 70/30%. WPs were obtained by hydrodynamic treatment that lasted for 5-45 min. Size estimation and distribution of WPs were carried out using the sieve method, and an analytical sieving machine. It was found that the size of WPs decreased with increasing hydrodynamic treatment time. WPs with sizes ranging from 100 to 300 μm constituted the majority of the wood pulp. After testing, the SEM method was used to examine the WP surface and WPC samples. The mixing of WPs and PLA was carried out using the melt mixing method. WPC for the study of mechanical properties was obtained by flat pressing in a mold. Tensile tests were conducted in accordance with GOST 11262-2017, bending tests in accordance with GOST 4648-2014. It is shown that the duration of hydrodynamic treatment of WPs for 25 min provides the highest strength parameters of PLA-based WPC. This can be explained by the uniform dispersion of fibrillated WPs in the polymer matrix and the formation of their adhesive bond by mechanical engagement.
    URL10.17423/afx.2024.66.1.04
    Kategória publikačnej činnosti ADN
    Báza dátxcla - ČLÁNKY
    Druh dok.RBX - rozpis článkov z periodík
    OdkazyPERIODIKÁ-Súborný záznam periodika
    Čísla2024: 1
    článok

    článok

Počet záznamov: 1  

  Tieto stránky využívajú súbory cookies, ktoré uľahčujú ich prezeranie. Ďalšie informácie o tom ako používame cookies.