Počet záznamov: 1
Comparison of the roughness of the CNC milled surface of selected wood species
SYS 0125983 LBL 00000naa^^22^^^^^^^^450 005 20250108101440.9 017 70
$a 10.17423/afx.2024.66.2.06 $2 DOI 100 $a 20170407d m y0sloc0103 ba 101 0-
$a eng 102 $a SK 200 1-
$a Comparison of the roughness of the CNC milled surface of selected wood species $f Lukáš Adamčík, Richard Kminiak, Adrián Banski 215 $c Obr., tab. 320 $a Lit. 330 $a This paper aims to quantify the surface roughness after the CNC milling of selected wood species. Optimization of the essential milling parameters, rotational speed, and feed speed is desirable for reducing surface roughness. Both technological parameters significantly contribute to the amount of feed per tooth, affecting surface roughness. In the experiment, three economically important wood species were compared – beech, oak, and spruce wood. In addition, the zones of sapwood, mature wood, and false heartwood were evaluated in beech wood. The surface roughness after milling was assessed using the Keyence VHX- 7000 digital microscope. The main result of the experiment is represented by the determination of the combination of the parameters mentioned above that produces the lowest roughness. In addition, roughness measurements were supplemented by microscopic analysis to explain roughness changes occurring on the surface. 463 -1
$1 001 sldk_un_cat*0125930 $1 011 $a 1336-3824 $1 200 1 $a Acta Facultatis Xylologiae Zvolen $e vedecký časopis Drevárskej fakulty $v Vol. 66, no. 2 (2024), s. 61-74 $1 210 $a Zvolen $c Technická univerzita vo Zvolene $d 2024 541 1-
$a Porovnanie drsnosti CNC frézovaného povrchu vybraných druhov dreva 610 $9 sldk_un_auth*h015643 $a drsnosť povrchu $X surface roughness 610 $9 sldk_un_auth*h032163 $a frézovanie CNC $X CNC milling 610 $9 sldk_un_auth*0063437 $a Keyence VHX-7000 $X Keyence VHX-7000 610 $9 sldk_un_auth*0008664 $a tvrdé drevo $X hardwood 610 $9 sldk_un_auth*h013725 $a mäkké drevo $X softwood 675 $a 539.211 $v 1. stred. $z slo 700 -1
$3 sldk_un_auth*0055941 $a Adamčík $b Lukáš $f 1997- $p TUZDFOD $4 070 $T Katedra obrábania dreva 701 -1
$3 sldk_un_auth*0010060 $a Kminiak $b Richard $f 1984- $p TUZDFOD $4 070 $T Katedra obrábania dreva 701 -1
$3 sldk_un_auth*p0029791 $a Banski $b Adrián $f 1975- $p TUZDFOD $4 070 $T Katedra obrábania dreva 801 -0
$a SK $b ZV001 $c 20170407 $g AACR2 856 4-
$u https://df.tuzvo.sk/sites/default/files/06-02-24.pdf
Počet záznamov: 1