Počet záznamov: 1
Properties of flat-pressed wood-polymer composites made using secondary polyethylene
SYS 0071583 LBL 00000naa^^22^^^^^^^^450 005 20190402084120.2 100 $a 20140328a m y0sloy0103 ba 101 0-
$a eng 102 $a SK 200 1-
$a Properties of flat-pressed wood-polymer composites made using secondary polyethylene $f Pavlo Lyutyy...[et al.] 215 $c Obr., graf. 320 $a Lit. 330 $a The influence of wood filler type (particles, flour, mixture of waste chips and sawdust at ratio 10:90), its content (20, 40, and 60 %), board density (800, 900, and 1000 kg×m−3), pressing temperature (160, 180, and 200 °C) and pressing time (6.4, 8.0, and 9.6 min) on the properties of flat-pressed wood-polymer composites (WPC) using a conventional flat-press process was investigated in this study. Dry-blending method was applied for mixing wood fillers and secondary polyethylene (sPE). The highest strength and water resistance were observed in flat-pressed WPC made using wood particles. The highest values of bending strength were noticed in WPC with 40 % content of wood particles and 60 % content of sPE. The further increase or decrease of wood particles content results in reduction of the bending strength values. Water resistance of flat-pressed WPC improves with the increasing of secondary polyethylene contents from 40 % to 80 %. With increasing board density from 800 to 1000 kg×m−3 the properties of flat-pressed WPC also improved. With increasing pressing temperature from 160 to 200 °C and pressing time from 6.4 to 9.6 min the strength of flat-pressed WPC noticeably increased and water resistance considerably improved. 463 -1
$1 001 sldk_un_cat*0071542 $1 011 $a 1336-3824 $1 200 1 $a Acta Facultatis Xylologiae Zvolen $e vedecký časopis Drevárskej fakulty $v Roč. 56, č. 1 (2014), s. 39-50 $1 210 $a Zvolen $c Technická univerzita vo Zvolene $d 2014 541 1-
$a Vlastnosti plošne lisovaných drevo-polymérových kompozitov vyrobených zo sekundárnych polyetylénov 610 1-
$9 sldk_un_auth*0035796 $a drevo-polymérové kompozity $X wood-polymer composites 610 1-
$9 sldk_un_auth*h001346 $a mechanické vlastnosti $X mechanical properties 610 1-
$9 sldk_un_auth*h001918 $a fyzikálne vlastnosti $X physical properties 610 1-
$9 sldk_un_auth*h012533 $a plnivá $X fillers 610 1-
$9 sldk_un_auth*0003985 $a polyetylén $X polyetylene 675 $a 539.2/.5 $v 2. stred $z slo 675 $a 667.622.5 $v 2. stred. $z slo 675 $a 678.742.2 $v 2.stred $z slo 700 -1
$3 sldk_un_auth*0035795 $a Lyutyy $b Pavlo $4 070 701 -1
$3 sldk_un_auth*p0034655 $a Bekhta $b Pavlo $4 070 701 -1
$3 sldk_un_auth*p0016396 $a Sedliačik $b Ján $f 1968- $p TUZDFNDV $4 070 $T Katedra nábytku a drevárskych výrobkov 701 -1
$3 sldk_un_auth*0017614 $a Ortynska $b Galina Jevgenivna $4 070 801 -0
$a SK $b ZV001 $c 20140328 $g AACR2 856 4-
$u https://df.tuzvo.sk/sites/default/files/05-1-14-lyutyy-bekhta-sedliacik-ortynska_1.pdf
Počet záznamov: 1