Počet záznamov: 1
Impact of tool wear on the quality of the surface in routing of MDF boards by milling machines with reversibile blades
SYS 0087090 LBL 00000naa^^22^^^^^^^^450 005 20190401131957.0 017 70
$a 10.17423/afx.2016.58.2.10 $2 DOI 100 $a 20161108a m y0sloy0103 ba 101 0-
$a eng 102 $a SK 200 1-
$a Impact of tool wear on the quality of the surface in routing of MDF boards by milling machines with reversibile blades $f Richard Kminiak, Mikuláš Siklienka, Ján Šustek 215 $c Obr., tab. 320 $a Lit. 330 $a The article deals with the impact of tool wear on the quality of the surfaces when routing MDF board. It describes an experiment in which the milled MDF board with thickness of 22 mm was milled with miller machine with diameter of 50 mm and with replaceable reversible blades on 5-axes CNC machining center. The article describes the dependence of the quality of the surface, namely the parameter of the arithmetical mean deviation of the roughness profile, on milled distance (0 m, 35 m, 70 m, to final tool wear) - stage of tool wear, i.e. alleviation of the cutting edge of reversible blades. The given dependence was observed for the three most widely used types of sintered carbides (T04F, T03SMG and T10MG). Article points out that it has not been proven a direct relationship between the tool wear and the quality of the surface. Significant deterioration was recorded at the end of the durability of the cutting edge due to direct damage of the cutting edge and due to forming of ridges that were formed on the given surface. Throughout the entire period of durability of the cutting edges of the reversible razor blades, surface of good quality was produced with an average value of the arithmetical mean deviation of the roughness profile below 11.1 microns. 463 -1
$1 001 sldk_un_cat*0086936 $1 011 $a 1336-3824 $1 200 1 $a Acta Facultatis Xylologiae Zvolen $e vedecký časopis Drevárskej fakulty $v Roč. 58, č. 2 (2016), s. 89-100 $1 210 $a Zvolen $c Technická univerzita vo Zvolene $d 2016 610 1-
$9 sldk_un_auth*h003430 $a frézovanie $X milling 610 1-
$9 sldk_un_auth*h015643 $a drsnosť povrchu $X surface roughness 610 1-
$9 sldk_un_auth*h011729 $a opotrebovanie nástrojov $X tool wear 610 1-
$9 sldk_un_auth*h011752 $a rezná hrana $X cutting edge 610 1-
$9 sldk_un_auth*0043413 $a obojstranné ostrie $X reversible blades 675 $a 621.914 $v 1. stred. $z slo 675 $a 539.211 $v 1. stred. $z slo 675 $a 620.193.95 $v 2.stred $z slo 700 -1
$3 sldk_un_auth*0010060 $a Kminiak $b Richard $f 1984- $p TUZDFOD $4 070 $T Katedra obrábania dreva 701 -1
$3 sldk_un_auth*p0016121 $a Siklienka $b Mikuláš $f 1952- $p TUZDFOD $4 070 $T Katedra obrábania dreva 701 -1
$3 sldk_un_auth*p0041631 $a Šustek $b Ján $f 1977- $p TUZDFOD $4 070 $T Katedra obrábania dreva 801 -0
$a SK $b ZV001 $c 20161108 $g AACR2 856 4-
$u https://df.tuzvo.sk/sites/default/files/10-02-16_1_0.pdf
Počet záznamov: 1