Počet záznamov: 1
Interlayer with microcapsules and its influence on the surface finish quality of wood
SYS 0108258 LBL 00000naa^^22^^^^^^^^450 005 20201106102512.1 017 70
$a 10.17423/afx.2020.62.2.06 $2 DOI 100 $a 20201106a m y0sloy0103 ba 101 0-
$a eng 102 $a SK 200 1-
$a Interlayer with microcapsules and its influence on the surface finish quality of wood $f Gabriela Slabejová, Mária Šmidriaková, Ján Svocák 215 $c Obr., tab. 320 $a Lit. 330 $a The paper deals with the quality of standard and modified surface finishes on beech, oak and spruce wood intended into exterior. Modified surface finish was created by the same coating materials as a standard surface finish, but it contained an interlayer with microcapsules. The quality of the surface finishes was assessed according to the film hardness, impact resistance, the resistance to scuffing, adhesion tests, the Cross-cut test and the Pull-off test for adhesion. The interlayer with microcapsules had no impact on the surface hardness of the surface finisheson beech wood and spruce wood, but it positively affected the film hardness of oak wood. The modified surface finish on beech wood and spruce wood showed a low impact resistance at a low drop height. It was more fragile andthe impact resistance test resulted in the cracks formation. The modified surface finish was more resistant to scuffing. The adhesion of the standard and modified surface finishes to individual tree species, tested according to the Cross-cut test, was the same or minimally different. According to the Pull-off test, the standard surface finish showed higher adhesion to beech wood and oak wood when compared with the modified surface finish. On spruce wood, the Pull-off testfor adhesion determined cohesion of wood surface layers. 463 -1
$1 001 sldk_un_cat*0108049 $1 011 $a 1336-3824 $1 200 1 $a Acta Facultatis Xylologiae Zvolen $e vedecký časopis Drevárskej fakulty $v Vol. 62, no. 2 (2020), s. 61-74 $1 210 $a Zvolen $c Technická univerzita vo Zvolene $d 2020 610 1-
$9 sldk_un_auth*h012704 $a adhézia $X adhesion 610 1-
$9 sldk_un_auth*h004740 $a tvrdosť $X hardness 610 1-
$9 sldk_un_auth*h013659 $a odolnosť proti nárazu $X impact resistance 610 1-
$9 sldk_un_auth*h010123 $a povrchové úpravy $X surface finishing 610 1-
$9 sldk_un_auth*h013023 $a odolnosť proti odieraniu $X abrasion resistance 675 $a 621.792 $v 1. stred. $z slo 700 -1
$3 sldk_un_auth*p0034565 $a Slabejová $b Gabriela $f 1975- $p TUZDFNDV $4 070 $T Katedra nábytku a drevárskych výrobkov 701 -1
$3 sldk_un_auth*0004692 $a Šmidriaková $b Mária $f 1961- $p TUZDFNDV $4 070 $T Katedra nábytku a drevárskych výrobkov 701 -1
$3 sldk_un_auth*p0025851 $a Svocák $b Ján $f 1975- $4 070 801 -0
$a SK $b ZV001 $c 20201106 $g AACR2 856 4-
$u https://df.tuzvo.sk/sites/default/files/06-02-20_0.pdf
Počet záznamov: 1