Počet záznamov: 1  

Assessment of wear of the bandsaw teeth in industrial conditions

  1. SYS0117695
    LBL
      
    00000naa^^22^^^^^^^^450
    005
      
    20230109134612.5
    017
    70
    $a 10.17423/afx.2022.64.2.07 $2 DOI
    100
      
    $a 20230109a m y0sloy0103 ba
    101
    0-
    $a eng
    102
      
    $a SK
    200
    1-
    $a Assessment of wear of the bandsaw teeth in industrial conditions $f Kazimierz A. Orłowski ... [et al.]
    215
      
    $c Graf. tab.
    320
      
    $a Lit.
    330
      
    $a A methodology for measuring bandsaw tooth wear is presented in this paper. This type of measurement is proposed as an alternative way of determining tooth wear in industrial conditions. The method is based on determining the KE value, i.e., the distance of the radius of the rounded cutting edge of the tooth and the intersection of the surface of the back and the surface of the face of the cutting wedge of the bandsaw tooth. The rate of wear of bandsaw teeth is determined by comparing the measured value with the KE values given in the literature. During the development of the methodology, experimental cutting tests were performed at a sawmill that specializes in the production of floors from multi-layer glued laminated wooden boards. The investigated band saw was applied in the sawing process of oak (Quercus L.) boards. The average moisture content of the wood was MC = 32.9% when using the "wet" technology of lamella production. Since the monitored wear values are not very high, the use of certified measuring instruments is strongly recommended.
    463
    -1
    $1 001 sldk_un_cat*0117610 $1 011 $a 1336-3824 $1 200 1 $a Acta Facultatis Xylologiae Zvolen $e vedecký časopis Drevárskej fakulty $v Vol. 64, no. 2 (2022), s. 69-76 $1 210 $a Zvolen $c Technická univerzita vo Zvolene $d 2022
    610
    1-
    $9 sldk_un_auth*h002426 $a pásové píly $X band sawing machines
    610
    1-
    $9 sldk_un_auth*h006549 $a dubové drevo $X oak wood
    610
    1-
    $9 sldk_un_auth*h001616 $a opotrebovanie $X wear
    610
    1-
    $9 sldk_un_auth*h011681 $a pílenie $X sawing
    610
    1-
    $9 sldk_un_auth*0046779 $a digitálne priemerky $X digital calipers
    675
      
    $a 630*822.34 $v 1. stred. $z slo
    675
      
    $a 621.935 $v 1. stred. $z slo
    675
      
    $a 630*81 $v 1. stred. $z slo
    675
      
    $a 674.093.6 $v 2.stred $z slo
    675
      
    $a 621.93 $v 1. stred. $z slo
    675
      
    $a 630*822.1 $v 2.stred $z slo
    701
    -1
    $3 sldk_un_auth*p0036508 $a Orłowski $b Kazimierz A. $4 070
    701
    -1
    $3 sldk_un_auth*0034436 $a Chuchała $b Daniel $4 070
    701
    -1
    $3 sldk_un_auth*0061593 $a Stenka $b Dawid $4 070
    701
    -1
    $3 sldk_un_auth*0061594 $a Przybylinski $b Tomasz $4 070
    801
    -0
    $a SK $b ZV001 $c 20230109 $g AACR2
    856
    4-
    $u https://df.tuzvo.sk/sites/default/files/07-02-22.pdf
Počet záznamov: 1  

  Tieto stránky využívajú súbory cookies, ktoré uľahčujú ich prezeranie. Ďalšie informácie o tom ako používame cookies.