Slabejová, Gabriela, 1975- Surface finishes for thermally modified beech wood / Gabriela Slabejová, Zuzana Vidholdová, Mária Šmidriaková. -- Obr., tab. -- Lit. - Natural oils and waxes are commonly used for wooden furniture and parquet surfaces. In the present study, linseed oil, hard wax oil and hard wax were applied as the surface finish on thermally modified beech wood. Adhesion of surface finishes to wood was evaluated by both Cross-cut test and Pull-off test. The impact resistance of the surface finishes was determined according to the standard.The film hardness was determined by the pencil test according to the standard.According to the Cross-cut test, the adhesion of oil surface finishes to native wood and to thermally modified wood was the same. Adhesion of wax surface finish to the thermally modified wood was lower than to native wood.According to the Pull-off test, the adhesion of oil surface finishes to thermally modified wood was lower than to native wood. Adhesion of wax surface finish to the thermally modified wood was the same as the adhesion to native wood. Thermally modified wood showed the increased surface hardness of the selected oil and wax surface finishes under static load (Pencil hardness test); however, under dynamic load (Impact resistance test), it showed increased brittleness.

In Acta Facultatis Xylologiae Zvolen : vedecký časopis Drevárskej fakulty. -- Zvolen : Technická univerzita vo Zvolene, 2019. -- ISSN 1336-3824. -- Vol. 61, no. 2 (2019), s. 41-50

I. Vidholdová, Zuzana, 1975-
II. Šmidriaková, Mária, 1961-
III. Acta Facultatis Xylologiae Zvolen : vedecký časopis Drevárskej fakulty. -- Vol. 61, no. 2 (2019), s. 41-50

621.792+674.031.632.2+630*81+665
ZV001