Výsledky vyhľadávania
Názov Granulometric analysis of sanding dust from selected wood species Aut.údaje Alena Očkajová, Martin Kučerka ... [et al.] Autor Očkajová Alena 1961- (58%) UMBFP07 - Katedra techniky a technológií
Spoluautori Kučerka Martin 1980- (14%) UMBFP07 - Katedra techniky a technológií
Krišťák Ľuboš (14%)
Igaz Rastislav (14%)
Zdroj.dok. BioResources. Vol. 13, no. 4 (2018), pp. 7481-7495. - Raleigh : North Carolina State University, 2018 Kľúč.slová wood dust granulometric analysis granularity Jazyk dok. slovenčina Krajina Spojené štáty Systematika 62 Anotácia Different types of sanders are used in every furniture and carpentry plant. The wood dust generated during sanding is considered one of the main health and safety hazards. The greatest danger to respiratory organs is a respirable (alveolar) component with a particle size of less than 10 μm. Thus, it is important to know the specific particle size fractions of wood dust. This study compared the granulometric compositions of abrasion wood dusts of selected wood species (beech and oak) and determined the statistical significance of individual factors (type of sander, wood species, grain size of sander, sanding direction) that affect the percentage of fractions ≤ 0.08 mm. The results confirmed that the use of narrow band and handheld (belt and disc) sanders caused high percentages of fractions ≤ 0.08 mm, above 90% in all cases. In these types of sanders, the working part of the sander is not completely covered, and the operator is in direct contact with the machine. Despite the use of a suction device, a certain amount of dust remains suspended in the air, or it settles on surfaces. In both cases, this dust poses a health and safety hazard URL Link na plný text Kategória publikačnej činnosti ADC Číslo archívnej kópie 42672 Kategória ohlasu KMINIAK, Richard - DZURENDA, Ladislav. Impact of sycamore maple thermal treatment on a granulometric composition of chips obtained due to processing on a CNC machining mentre. In Sustainability. ISSN 2071-1050, 2019, vol. 11, no. 3, pp. 1-10.
KMINIAK, Richard - DZURENDA, Ladislav. Granulometric composition of chips from the milling process of spruce on a CNC machining center. In Annals of Warsaw University of life sciences - SGGW (Forestry and Wood Technology). ISSN 1898-5912, 2018, no. 104, pp. 48-52.
MOJŽIŠ, Miroslav - BUBENÍKOVÁ, Tatiana - ZACHAR, Martin - KACIKOVÁ, Danica - STEFKOVÁ, Jaroslava. Comparison of natural and synthetic sorbents' efficiency at oil spill removal. In BioResources . ISSN 1930-2126, 2019, vol. 14, no. 4, pp. 8738-8752.
VANDLIČKOVÁ, Miroslava - MARKOVÁ, Iveta - MAKOVICKÁ-OSVALDOVÁ, Linda - GAŠPERCOVÁ, Stanislava - SVETLÍK, Jozef. Evaluation of African Padauk (Pterocarpus soyauxii) explosion dust. In BioResources. ISSN 1930-2126, 2020, vol. 15, no. 1, pp. 401-414.
DADO, Miroslav - MIKUŠOVÁ, Lucia - SCHWARZ, Marian - HNILICA, Richard. Effect of selected factors on mass concentration of airborne dust during wood sanding. In MM Science journal. ISSN 1803-1269, 2019, vol. 2019, pp. 3679-3682.
VANDLIČKOVÁ, Miroslava - MARKOVÁ, Iveta. Ignition of wood dust of African Padauk (Pterocarpus Soyauxii). In International scientific conference on woods and fire safety. Springer : Cham, 2020. ISBN 978-3-030-41234-0, pp. [1-4].
VANDLIČKOVÁ, Miroslava - MARKOVÁ, Iveta - OSVALDOVÁ, Linda Makovicka - GAŠPERCOVÁ, Stanislava - SVETLÍK, Jozef - VRANIAK, Jozef. Tropical wood dusts-granulometry, morfology and ignition temperature. In Applied sciences. ISSN 2076-3417, 2020, vol. 10, no. 21, pp. 1-15.
PEDZIK, Marta - STUPER-SZABLEWSKA, Kinga - SYDOR, Maciej - ROGOZINSKI, Tomasz. Influence of grit size and wood species on the granularity of dust particles during sanding. In Applied sciences. ISSN 2076-3417, 2020, vol. 10, no. 22, pp. 1-9.
ROGOZINSKI, Tomasz - CHUCHALA, Daniel - PEDZIK, Marta - ORLOWSKI, Kazimierz A. - DZURENDA, Ladislav - MUZINSKI, Tomasz. Influence of drying mode and feed per tooth rate on the fine dust creation in pine and beech sawing on a mini sash gang saw. In European journal of wood and wood products. ISSN 0018-3768, 2021, vol. 79, no. 1, pp. 91-99.
KWIDZINSKI, Zdzislaw - BEDNARZ, Joanna - PEDZIK, Marta - SANKIEWICZ, Lukasz - SZAROWSKI, Piotr - KNITOWSKI, Bartlomiej - ROGOZINSKI, Tomasz. Innovative line for door production technoPORTA - technological and economic aspects of application of wood-based materials. In Applied sciences. ISSN 2076-3417, 2021, vol. 11, no. 10, art. no. 4502, pp. 1-20.
SYDOR, Maciej - MIRSKI, Radoslaw - STUPER-SZABLEWSKA, Kinga - ROGOZINSKI, Tomasz. Efficiency of machine sanding of wood. In Applied sciences. ISSN 2076-3417, 2021, vol. 11, no. 6, art. no. 2860, pp. 1-12.
VANDLIČKOVÁ, Miroslava - MARKOVÁ, Iveta - HOLLÁ, Katarína - GAŠPERCOVÁ, Stanislava. Evaluation of marblewood dust's (Marmaroxylon racemosum) effect on ignition risk. In Applied sciences - Basel. ISSN 2076-3417, 2021, vol. 11, no. 15, art. no. 6874, pp. 1-9.
GEJDOŠ, Miloš - LIESKOVSKÝ, Martin. Selected risks in the storage of biomass in heating plants of urban-type : Slovakian case study. In WoodEMA 2021 : the response of the forest-based sector to changes in the global economy : 14th international scientific conference, Koper, 16th-18th June 2021. Zagreb : WoodEMA - International association for economics and management in wood processing and furniture manufacturing, 2021. ISBN 978-961614441-4, pp. 399-404.
MRAČKOVÁ, Eva - SCHMIDTOVÁ, Jarmila - KMEŤOVÁ, Elena - KAČÍKOVÁ, Danica. Granulometric analysis of spruce wood dust. In Delta (Zvolen). ISSN 1337-0863, 2021, vol. 15, no. 1, pp. 50-57.
DEMBINSKI, Czeslaw - POTOK, Zbigniew - DOLNY, Stanislaw - KMINIAK, Richard - ROGOZINSKI, Tomasz. Performance of filter bags used in industrial pulse-jet baghouses in wood-based panels furniture factory. In Applied sciences (Basel). ISSN 2076-3417, 2021, vol. 11, no. 19, pp. 1-15.
VANDLÍČKOVÁ, Miroslava - MARKOVÁ, Iveta - GAŠPERCOVÁ, Stanislava - HOLLÁ, Katarína. Effect of particle size distribution of cumar dust on risk of initiation. In Waste forum. ISSN 1804-0195, 2021, no. 4, pp. 273-285.
GALLO, Pietro - FAILLA, Sabina - BIOCCA, Marcello - PARIS, Enrico - GALLUCCI, Francesco - FORNACIARI, Laura - SCHILLACI, Giampaolo. Exposure to heavy metals in wood dust during dry-pruning in vineyard. In Lecture notes in civil engineering : 06th international conference on safety, health and welfare in agriculture and agro-food systems (SHWA 2021), online, 15th-18th September 2021. ISSN 2366-2557, 2022, vol. 252 LNCE, pp. 207-215.
TUREKOVA, Ivana - MARKOVA, Iveta - SVENTEKOVA, Eva - HARANGOZO, Jozef. Evaluation of microclimatic conditions during the teaching process in selected school premises. Slovak case study. In Energy. ISSN 0360-5442, 2022, vol. 239, part D, art. no. 122161, pp. 1-8.
RATNASINGAM, Jegatheswaran. Sanding process. In Furniture manufacturing : a production engineering approach. Singapore : Springer Singapore, 2022. ISBN 978-981-16-9411-0, pp. 79-88.
CUI, Yunqi - YIN, Jian - CAI, Yitong - WANG, Huimin - DING, Tao - ZHU, Nanfeng. Morphological characteristics of bamboo panel milling dust derived from different average chip thicknesses. In Forests. ISSN 1999-4907, 2022, vol. 13, no. 9, pp. 1-18.
DADO, Miroslav - SALVA, Jozef - SCHWARZ, Marian - VANEK, Miroslav - BUSTIN, Lucia. Effect of grit size on airborne particle concentration and size distribution during oak wood sanding. In Applied sciences (Basel). ISSN 2076-34717, 2022, vol. 12, no. 15, pp. 1-14.
ZHOU, Xihe - LI, Xiaoxu - CUI, Zhongwen - WU, Lin - ZHOU, Handong - LU, Xiaoning. Combustible wood dust explosions and impacts on environments and health - a review. In Environmental research. ISSN 0013-9351, 2023, vol. 216, art. no. 114658, pp. 1-17.
PONPRATHOM, Yothin. Design and development of protective equipment from noise and dustof circular saws. In Advanced science journal. ISSN 1513-9980, 2022, vol. 22, no. 2, pp. R1-R20.
KOLEDA, Pavol - KOLEDA, Peter - HRČKOVÁ, Mária - JÚDA, Martin - HORTOBÁGYI, Áron. Experimental granulometric characterization of wood particles from CNC machining of chipboard. In Applied sciences. ISSN 2076-3417, 2023, vol. 13, no. 9, pp. 1-15.
BIOCCA, Marcello - POCHI, Daniele - GALLO, Pietro - FANIGLIULO, Roberto. Air-borne particle size distribution of wood dust emitted during small scale forestry operations. In Journal of basic and applied sciences [online]. 2023, vol. 19, pp. 60-67 [cit. 2023-09-06]. ISSN 1927-5129. Dostupné na: https://doi.org/10.29169/1927-5129.2023.19.05
SHER, Farooq - BOŠKAILO, Emina - SMJEČANIN, Narcisa - NEMȚANU, Monica R. - SHER, Emina K. - LIMA, Eder C. Magnetic multifunctional nanomaterials for enhanced transverse chemical and bioanalytical applications - a review. In TrAC trends in analytical chemistry. ISSN 0165-9936, 2024, vol. 173, art. no. 117622, pp. 1-19.
Katal.org. BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici Báza dát xpca - PUBLIKAČNÁ ČINNOSŤ Odkazy PERIODIKÁ-Súborný záznam periodika 
nerozpoznaný
Názov Thermal analysis of granulometry selected wood dust particles Podnázov granulometry of wood dusts Aut.údaje Iveta Marková, Emília Hroncová ... [et al.] Autor Marková Iveta 1971- (30%) UMBFP04 - Katedra životného prostredia
Spoluautori Hroncová Emília 1977- (5%) UMBFP04 - Katedra životného prostredia
Tomaškin Ján 1963- (15%) UMBFP04 - Katedra životného prostredia
Tureková Ivana (50%)
Zdroj.dok. BioResources. Vol. 13, no. 4 (2018), pp. 8041-8060. - Raleigh : North Carolina State University, 2018 Kľúč.slová wood dust analysis granulometric analysis of dust samples Jazyk dok. angličtina Krajina Spojené štáty Systematika 502 Anotácia Wood dust is generated as a by-product of machining. This paper discusses the granulometric analysis of selected samples of wood-settled dust from spruce (Picea excelsa), fir (Abies alba), oak (Quercus petraea Liebl.), beech (Fagus sylvatica L.), and alder (Alnus glutinosa L.). It also includes a sample of a mixture from timber production grinders in order to select the percentages of the various fractions (32 μm, 63 μm, 80 μm, 125 μm, 250 μm, 500 μm, 1000 μm, 2000 μm) of wood dust samples. Wood dust samples were made using a hand orbital sander and sized on an automatic mesh vibratory sieve machine. Comparison of the resulting granulometric fractions’ contributions to wood sanding dust was confirmed by the particle size. This paper presents selected characteristics of the chosen wood dusts by the size of particle dust fractions on the base of continual thermal loading. Thermal properties of wood dust samples were characterized by thermal gravimetric analysis (TGA). The TGA results indicated different thermal degradation fractions of the wood dust samples during thermal loading. The wood dust consisted mainly of fractions of 80 μm, 32 μm, and < 32 μm. These fractions of all wood dusts species presented more than 70.00% of the sample (alder dust has more 80% of sample). Thermal characteristics were not confirmed by the particle size and different wood dust URL Link na zdrojový dokument Link na plný text Kategória publikačnej činnosti ADC Číslo archívnej kópie 43864 Kategória ohlasu OČKAJOVÁ, Alena - BARCÍK, Štefan - KUČERKA, Martin - KOLEDA, Peter - KORČOK, Michal - VYHNÁLIKOVÁ, Zuzana. Wood dust granular analysis in the sanding process of thermally modified wood versus its density. In BioResources. ISSN 1930-2126, 2019, vol. 14, no. 4, pp. 8559-8572.
MARTINKA, Jozef - STEFKO, Tomas - WACHTER, Igor - RANTUCH, Peter. Impact of electrical cables embedded into oriented strand board on critical heat flux. In Wood research. ISSN 1336-4561, 2020, vol. 65, no. 2, pp. 257-270.
MARTINKA, Jozef - RANTUCH, Peter - ŠTEFKO, Tomáš - WACHTER, Igor. Electric cables installed in OSB boards surfaces and their temperature. In Wood and fire safety : proceedings of the 9th international conference on wood and fire safety 2020, Hotel Patria, Štrbské pleso, 03th-06th May 2020. Cham : Springer, 2020. ISBN 978-3-030-41234-0, pp. 426-431.
KURACINA, Richard - SZABOVÁ, Zuzana - BALOG, Karol. Study of selected fire characteristics of beech wood depending on particle size. In Wood and fire safety : proceedings of the 9th international conference on wood and fire safety 2020, Hotel Patria, Štrbské pleso, 03th-06th May 2020. Cham : Springer, 2020. ISBN 978-3-030-41234-0, pp. 16-21.
RABAJCZYK, Anna - MALOZIEC, Daniel - BAK, Damian - DZIECHCIARZ, Anna. Importance of sieve analysis in conducting explosive tests of materials. In Przemysl chemiczny. ISSN 0033-2496, 2020, vol. 99, no. 7, pp. 1027-1031.
KMINIAK, Richard - ORLOWSKI, Kazimierz A. - DZURENDA, Ladislav - CHUCHALA, Daniel - BANSKI, Adrián. Effect of thermal treatment of birch wood by saturated water vapor on granulometric composition of chips from sawing and milling processes from the point of view of its processing to composites. In Applied sciences. ISSN 2076-3417, 2020, vol. 10, no. 21, pp. 1-13.
KURACINA, Richard - SZABOVÁ, Zuzana - BACHRATÝ, Michal - MYNARZ, Miroslav - ŠKVARKA, Marián. A new 365-litre dust explosion chamber : design and testing. In Powder technology. ISSN 0032-5910, 2021, vol. 386, pp. 420-427.
PALANIYAPPAN, Sabarinathan - VEEMAN, Dhinakaran - SIVAKUMAR, Narain Kumar - NATRAYAN, L. Development and optimization of lattice structure on the walnut shell reinforced PLA composite for the tensile strength and dimensional error properties. In Structures. ISSN 2352-0124, 2022, vol. 45, pp. 163-178.
BAK, Damian - DZIECHCIARZ, Anna - LESIAK, Piotr - KLAPSA, Wojciech. Differences in the explosion parameters of dusts of the same material in the context of the place of their accumulation in different points of technological installations. In Przemysl chemiczny. ISSN 0033-2496, 2022, vol. 101, no. 11, pp. 963-968.
KRISTAK, Lubos - RÉH, Roman - KUBOVSKÝ, Ivan. New challenges in wood and wood-based materials II. In Polymers. ISSN 0171-709X, 2023, vol. 15, no. 6, pp. 1-7.
AYDEMIR, Deniz - AKSU, Oğuz - BARDAK, Timucin - YAMAN, Barbaros - SÖZEN, Eser - YALÇIN, Ömer Ümit - GÜNDÜZ, Gökhan - KOÇAN, Nurhan. Mechanical characterization and strain analysis applied to the heat treatment of wood materials, by means of digital image correlation. In BioResources. ISSN 1930-2126, 2024, vol. 19, no. 2, pp. 3010-3030.
MATHIAZHAGAN, N. - SIVAKUMAR, Narain Kumar - PALANIYAPPAN, Sabarinathan - RAHAMAN, Mostafizur. Influence of printing-based factors on the mechanical properties of hexagonal lattice-structured 3D printed novel walnut shell/polylactic acid composite. In Journal of thermoplastic composite materials. ISSN 0892-7057, 2024, vol. 37, no. 2, pp. 713-742.
ÖCAL, Bulutcem - YÜKSEL, Asli. Liquefaction of oak wood using various solvents for bio-oil production. In ACS Omega. ISSN 2470-1343, 2023, vol. 8, no. 43, pp. 40944-40959.
Katal.org. BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici Báza dát xpca - PUBLIKAČNÁ ČINNOSŤ Odkazy PERIODIKÁ-Súborný záznam periodika nerozpoznaný