Výsledky vyhľadávania
Názov Sustainable manufacturing process in wood machining Aut.údaje Alena Očkajová, Martin Kučerka, Adrián Banski Autor Očkajová Alena 1961- (34%) UMBFP07 - Katedra techniky a technológií
Spoluautori Kučerka Martin 1980- (33%) UMBFP07 - Katedra techniky a technológií
Banski Adrián (33%)
Zdroj.dok. Trieskové a beztrieskové obrábanie dreva : vedecký časopis. Č. 13 (2022), s. 75-80. - Zvolen : Technická univerzita vo Zvolene, 2022 ; Trieskové a beztrieskové obrábanie dreva medzinárodná vedecká konferencia Kľúč.slová udržateľnosť - sustainability výrobné procesy - manufacturing processes pílenie pílové kotúče prachové častice Form.deskr. články - journal articles Jazyk dok. angličtina Krajina Slovenská republika Anotácia The aim of this paper is to point out the importance of sustainability also in production processes. For the process of longitudinal sawing of beech, beech with a healthy false heart and spruce, we characterized the most important inputs and outputs of the given process based on the scheme from the viewpoint of sustainability. The aim of our investigation was the use of 2 different saw blades SB1 and SB2 and their effect on the granularity of sawdust from the viewpoint of dust particles ≤ 100 μm, which are dangerous for the operating personnel, because dust from hardwoods in particular is included among carcinogens. The proportion of individual sawdust fractions was obtained by sieve analysis. When sawing with the SB2 disc, 56.76 % ÷ 76.0 9% of dust particles ≤ 100 μm are produced compared to SB1 within the selected variants. When comparing woods, the proportion of dust particles ≤ 100 μm for spruce for all variants ranged from 7.95 ÷ 15.09 %, for beech from 10.52 ÷ 24.03 %, which is quite a high percentage, since it is a carcinogen. By choosing the right tool, we can reduce the share of the dust particles ≤ 100 μm, which is dangerous for the working environment. URL Link na zdrojový dokument Kategória publikačnej činnosti AFD Číslo archívnej kópie 52021 Katal.org. BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici Báza dát xpca - PUBLIKAČNÁ ČINNOSŤ 
článok
Názov Reduction of dustiness in sawing wood by universal circular saw Súbež.n. Smanjenje emisije drvne prašine tijekom piljenja drva univerzalnom kružnom pilom Aut.údaje Očkajová A., Beljo Lučić R., Čavlovič A., Tereňová J. Spoluautori Očkajová Alena 1961- (50%) UMBFP07 - Katedra techniky a technológií
Ďalší autori Beljo Lučić R. (Autor) (20%)
Čavlovič A. (Autor) (20%)
Tereňová J. (Autor) (10%)
Zdroj.dok. Drvna industrija : znanstveno stručni časopis za pitanja drvne tehnologije. Roč. 57, č. 3 (2006), s. 119-126. - Zagreb : Šumarski fakultet Sveučilišta u Zagrebu, 2006 Kľúč.slová pílenie drevný prach pílové kotúče sawing wood dust saw blades Jazyk dok. angličtina Krajina Chorvátsko Systematika 621.931 Kategória publikačnej činnosti ADE Číslo archívnej kópie 4583 Kategória ohlasu DZURENDA, Ladislav - KUČERKA, Martin. Granularity of sawdust from processes of wood sawing with frame, log band and circular saws. In Wood machining and processing - product quality and waste characteristics. Warsaw : WULS - SGGW Press, 2009. ISBN 978-83-7583-107-8, s. 96-115.
DZURENDA, Ladislav - ORLOWSKI, Kazimierz. Influence of feed rate on the granularity and homogenity of oak sawdust obtained during the sawing process on the frame sawing machine PRW 15M. In Woodworking techniques : 4th International scientific conference. Prague ; Zagreb : Czech Universtiy of Life Sciences ; University of Zagreb, 2011. ISBN 978-80-213-2182-3, pp. 99-104.
WIELOCH, Grzegorz - OSAJDA, Marcin. Influence of inclination angle of cutting SPRT edge during turning on the size of created chips. In Woodworking techniques : 4th International scientific conference. Prague ; Zagreb : Czech Universtiy of Life Sciences ; University of Zagreb, 2011. ISBN 978-80-213-2182-3, pp. 352-361.
DZURENDA, Ladislav - ORLOWSKI, Kazimierz - GRZESKIEWICZ, Marek. Effect of thermal modification of oak wood on sawdust granularity. In Drvna Industrija : znanstveno stručni časopis za pitanja drvne technologije. ISSN 0012-6772, 2010, vol. 61, no. 2, pp. 89-94.
DZURENDA, Ladislav. The influence of construction of sawing machines on the granularity of sawdust from the process of wood sawing. In Woodworking technique : 3rd International scientific conference. Zagreb : University of Zagreb, Faculty of Forestry, 2009. ISBN 978-953-292-009-3, pp. 129-141.
KOPECKÝ, Zdeněk - ROUSEK, Miroslav - VESELÝ, Přemysl - CHLEBOVSKÝ, Robert. Dustiness at cutting agglomerated materials. In Woodworking technique : 3rd Internatinal scientific conference. Zagreb : University of Zagreb, Faculty of forestry, 2009. ISBN 978-953-292-009-3, pp. 177-186.
ARGAY, Filip. Effect of the saw blade teeth number on transverse cutting process noise when cutting beechwood. In Acta Facultatis Xylologiae. ISSN 1336-3824, 2014, vol. 56, no. 1, pp. 77-85.
RYBAKOWSKI, Marek - BACHMAN, Paweł. Innovative safety system of work of wood cutting electric table saw, based on the measurement of current consumption. In Advanced Materials Research. ISSN 1022-6680, 2014, vol. 1001, pp. 421-425.
KMINIAK, Richard - SIKLIENKA, Mikuláš. Vplyv počtu zubov pílového kotúča na kvalitu vytvoreného povrchu pri priečnom pílení bukového reziva na kapovacej kotúčovej píle. In Trieskové a beztrieskové obrábanie dreva 2014 : zborník prednášok, IX. medzinárodná vedecká konferencia, Zvolen, 11. - 13. september 2014. Zvolen : Technická univerzita, 2014. ISBN 978-80-228-2658-7, s. 75-82.
BARISKA, M. - PÁSZTORY, Z. The optimum log feed speed with bandsaw. In European journal of wood and wood products. ISSN 0018-3768, 2015, vol. 73, no. 2, pp. 245-250.
KMINIAK, Richard. Effect of the saw blade construction on the surface quality when transverse sawing spruce lumber on crosscut miter saw. Vplyv konštrukcie pílového kotúča na kvalitu vytvoreného povrchu pri priečnom pílení smrekového reziva na kapovacej pokosovej píle. In Acta Facultatis Xylologiae. ISSN 1336-3824, 2014, vol. 56, no. 2, pp. 87-96.
KOLEDA, Pavol - KOLEDA, Peter. Optical measurements of sawdust dimensions. In Wood research. ISSN 1336-4561, 2016, vol. 61, no. 3, pp. 505-512.
SIKLIENKA, Mikuláš - KMINIAK, Richard - ŠUSTEK, Ján - JANKECH, Andrej. Delenie a obrábanie dreva : vysokoškolská učebnica. Zvolen : Technická univerzita vo Zvolene, 2017. 357 s. ISBN 978-80-228-2845-1.
KOLEDA, Pavol - HRČKOVÁ, Mária. Zisťovanie farby termicky modifikovaného dreva pomocou programu Matlab. In Acta Facultatis technicae. ISSN 1336-4472. 2017, roč. 22, č. 2, s. 9-16.
BARANSKI, Jacek - JEWARTOWSKI, Marcin - WAJS, Jan - ORLOWSKI, Kazimierz A. - PIKALA, Tomasz. Experimental examination and modification of chip suction system in circular sawing machine. In Drvna industrija. ISSN 0012-6772, 2018, vol. 69, no. 3, pp. 223-230.
NASIR, Vahid - COOL, Julie. A review on wood machining : characterization, optimization, and monitoring of the sawing process. In Wood material science and engineering. ISSN 1748-0272, 2020, vol. 15, no. 1, pp. 1-16.
KMINIAK, Richard - DZURENDA, Ladislav. Impact of sycamore maple thermal treatment on a granulometric composition of chips obtained due to processing on a CNC machining mentre. In Sustainability. ISSN 2071-1050, 2019, vol. 11, no. 3.
ORŁOWSKI, Kazimierz A. - CHUCHAŁA, Daniel - MUZIŃSKI, Tomasz - BARAŃSKI, Jacek - BANSKI, Adrián - ROGOZIŃSKI, Tomasz. The effect of wood drying method on the granularity of sawdust obtained during the sawing process using the frame sawing machine. In Acta Facultatis Xylologiae Zvolen. ISSN 1336-3824, 2019, vol. 61, no. 1, pp. 83-92.
PIERNIK, Magdalena - ROGOZINSKI, Tomasz - KRAUSS, Andrzej - PINKOWSKI, Grzegorz. The influence of the thermal modification of pine (Pinus sylvestris L.) wood on the creation of fine dust particles in plane milling Fine dust creation in the plane milling of thermally modified pine wood. In Journal of occupational health. ISSN 1341-9145, 2019, vol. 61, no. 6, pp. 481-488.
NASIR, Vahid - COOL, Julie. Optimal power consumption and surface quality in the circular sawing process of Douglas-fir wood. In European journal of wood and wood products. ISSN 0018-3768, 2019, vol. 77, no. 4, pp. 609-617.
KMINIAK, Richard - BANSKI, Adrián. Granulometric analysis of chips from beech, oak and spruce woodturning blanks produced in the milling process using 5-axial cnc machining center. In Acta facultatis xylologiae Zvolen. ISSN 1336-3824, 2019, vol. 61, no. 1, pp. 75-82.
VANDLIČKOVÁ, Miroslava - MARKOVÁ, Iveta - MAKOVICKÁ-OSVALDOVÁ, Linda - GAŠPERCOVÁ, Stanislava - SVETLÍK, Jozef. Evaluation of African Padauk (Pterocarpus soyauxii) explosion dust. In Bioresources. ISSN 1930-2126, 2020, vol. 15, no. 1, pp. 401-414.
PALUBICKI, Bartosz - HLASKOVÁ, Ludka - ROGOZINSKI, Tomasz. Influence of exhaust system setup on working zone pollution by dust during sawing of particleboards. In International journal of environmental research and public health. ISSN 1660-4601, 2020, vol. 17, no. 10.
NASIR, Vahid - COOL, Julie. Characterization, optimization, and acoustic emission monitoring of airborne dust emission during wood sawing. In International journal of advanced manufacturing technology. ISSN 0268-3768, 2020, vol. 109, no. 9-12, pp. 2365-2375.
KMINIAK, Richard - ORLOWSKI, Kazimierz A. - DZURENDA, Ladislav - CHUCHALA, Daniel - BANSKI, Adrián. Effect of thermal treatment of birch wood by saturated water vapor on granulometric composition of chips from sawing and milling processes from the point of view of its processing to composites. In Applied sciences. ISSN 2076-3417, 2020, vol. 10, no. 21, pp. 1-13.
VANDLIČKOVÁ, Miroslava - MARKOVÁ, Iveta - OSVALDOVÁ, Linda Makovicka - GAŠPERCOVÁ, Stanislava - SVETLÍK, Jozef - VRANIAK, Jozef. Tropical wood dusts-granulometry, morfology and ignition temperature. In Applied sciences. ISSN 2076-3417, 2020, vol. 10, no. 21.
ROGOZINSKI, Tomasz - CHUCHALA, Daniel - PEDZIK, Marta - ORLOWSKI, Kazimierz A. - DZURENDA, Ladislav - MUZINSKI, Tomasz. Influence of drying mode and feed per tooth rate on the fine dust creation in pine and beech sawing on a mini sash gang saw. In European journal of wood and wood products. ISSN 0018-3768, 2021, vol. 79, no. 1, pp. 91-99.
Katal.org. BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici Báza dát xpca - PUBLIKAČNÁ ČINNOSŤ Odkazy PERIODIKÁ-Súborný záznam periodika 
nerozpoznaný
Názov Analýza vibrácií pílových kotúčov pomocou holografie Aut.údaje Jozef Černecký, Rozmarín Dubovská Autor Černecký Jozef UMBFP07 - Katedra techniky a technológií
Spoluautori Dubovská Rozmarína UMBFP07 - Katedra techniky a technológií
Zdroj.dok. XI. DIDMATTECH 98. S. 103-106. - Olomouc : Univerzita Palackého v Olomouci, 1998 Kľúč.slová holografia pílové kotúče vibrácie vynútené kmity Systematika 62 Kategória publikačnej činnosti AEC Katal.org. BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici Báza dát xpca - PUBLIKAČNÁ ČINNOSŤ nerozpoznaný