Zdroje	Záznamy
Univerzita Mateja Bela - Súborný katalóg UK UMB	16 z 280088
Univerzita Mateja Bela - Súborný katalóg UK UMB	16 z 280088

Názov	The influence of thermal modification of oak, spruce and meranti blanks on surface roughness during sanding
Aut.údaje	Martin Kučerka ... [et al.]
Autor	Kučerka Martin 1980- (30%) UMBFP07 - Katedra techniky a technológií
Spoluautori	Kminiak Richard (30%) Krišťák Ľuboš (20%) Rogozinski Tomasz (10%) Pedzik Marta (10%)
Zdroj.dok.	Proceedings : eleventh international scientific and technical conference Innovations in forest industry and engineering design INNO 2022. Pp. 113-122. - Sofia : University of Forestry, 2022 ; Innovations in forest industry and engineering design INNO 2022 medzinárodná vedecká a technická konferecia
Kľúč.slová	hydrotermicky upravené drevo brúsenie povrchové úpravy dreva
Form.deskr.	príspevky v zborníku - proceedings papers
Jazyk dok.	angličtina
Krajina	Bulharsko
Anotácia	Products made of thermally treated wood have different requirements for the quality of the created surface, depending on their application area. While we can make do with a milled surface for tiling and flooring, we have more sophisticated products such as garden furniture, etc. that require final surface sanding. The article focuses on the effect of thermal modification on the quality of the ground surface. It compares the surface quality of the ground surface of native woods oak, spruce and meranti with their thermally treated variants at temperatures of 160°C, 180°C, 200°C and 220°C. Quality is examined on a surface sanded with a belt sander with 80-grit sandpaper. It points to the fact that the process of a thermal modification slightly impairs the quality of the ground surface. However, when evaluating a surface on a larger scale, the quality of the created surface is influenced mainly by the "natural roughness of the wood" by the opening of anatomical elements of the wood, which are the primary source of increased roughness.
Kategória publikačnej činnosti	AFC
Číslo archívnej kópie	52105
Katal.org.	BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici
Báza dát	xpca - PUBLIKAČNÁ ČINNOSŤ

Názov	The effect of the granulometric composition of beech chips from a CNC machining center on the environmental separation technique
Aut.údaje	Martin Kučerka ... [et al.]
Autor	Kučerka Martin 1980- (30%) UMBFP07 - Katedra techniky a technológií
Spoluautori	Očkajová Alena 1961- (25%) UMBFP07 - Katedra techniky a technológií Kminiak Richard (25%) Pędzik Marta (10%) Rogozinski Tomasz (10%)
Zdroj.dok.	Acta Facultatis Xylologiae Zvolen. Roč. 64, č. 1 (2022), s. 89-97. - Zvolen : Technická univerzita vo Zvolene, 2022
Kľúč.slová	drevospracujúci priemysel drevo - wood ekológia - ecology
Form.deskr.	články - journal articles
Jazyk dok.	slovenčina
Krajina	Slovenská republika
Anotácia	The aim of the paper is to determine the granulometric composition of chip removed from the beech lumber milling process using a CNC machining center SCM Tech Z5 in the range of commonly used technical and technological parameters under standard conditions of feed speed: v(f) = 1 divided by 5 m.min(-1) and the thickness of the removed layer: e = 1, 3 and 5 mm. Another goal of the paper was to select a suitable separation technique that would be sufficient to effectively capture the largest possible dispersion of fractions in the beech lumber milling process. Granulometric analysis showed that under the given conditions in the milling process the largest proportion of coarse and medium coarse fraction is formed and particles with a size smaller than 32 mu m are not formed. For this reason, it is our recommendation to choose a combination of dry mechanical separators together with fabric filters, as mechanical separators are able to capture mainly larger particle fractions. Fabric filters would serve to trap any finer particles, thus saving the user from greater wear of the coarse and medium coarse fractions, which would increase the wear of the filter cloth to an increased extent.
URL	Link na plný text
Kategória publikačnej činnosti	ADN
Číslo archívnej kópie	51836
Kategória ohlasu	KOLEDA, Pavol - KOLEDA, Peter - HRČKOVÁ, Mária - JÚDA, Martin - HORTOBÁGYI, Áron. Experimental granulometric characterization of wood particles from CNC machining of chipboard. In Applied sciences. ISSN 2076-3417, 2023, vol. 13, no. 9, pp. 1-15.
Katal.org.	BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici
Báza dát	xpca - PUBLIKAČNÁ ČINNOSŤ
Odkazy	PERIODIKÁ-Súborný záznam periodika

Názov	Granulometric characterization of wood dust emission from CNC machining of natural wood and medium density fiberboard
Aut.údaje	Richard Kminiak, Martin Kučerka ... [et al.]
Autor	Kminiak Richard (20%)
Spoluautori	Kučerka Martin 1980- (27%) UMBFP07 - Katedra techniky a technológií Krišťák Ľuboš (20%) Réh Roman (20%) Antov Petar (1%) Očkajová Alena 1961- (10%) UMBFP07 - Katedra techniky a technológií Rogozinski Tomasz (1%) Pędzik Marta (1%)
Zdroj.dok.	Forests. Vol. 12, no. 8 (2021), pp. 1-15. - Basel Basel : MDPI : Multidisciplinary Digital Publishing Institute, 2021
Kľúč.slová	ochrana zdravia pri práci drevné kompozity drevný prach emisie granulometria prachu distribúcia produktu obrábanie dreva drevotrieskové dosky
Heslá geogr.	Slovensko
Form.deskr.	články - journal articles
Jazyk dok.	angličtina
Krajina	Švajčiarsko
Anotácia	The aim of this paper was to determine the particle size composition of wood dust emission from CNC milling of natural wood and medium-density fiberboard (MDF) and evaluate the associated occupational exposure risks. The paper is focused on some of the most commonly used materials in the woodworking and furniture industry, i.e., solid wood (beech, oak, and spruce) and composite materials (MDF panels). In addition to the influence of the machined material, the effect of the technical-technological parameters, namely, feed speed and depth of cut on the particle size distribution, was also investigated. The selected values of the technical-technological parameters used in this study followed the common work practice in small wood processing companies. The particle size distribution was evaluated by using sieve analysis of samples from the total mass of collected wood dust. The results demonstrated that machining of natural wood is characterized mostly by the formation of coarse dust fractions (2 mm–1 mm sieves), whilst the processing of MDF was associated with generation of fine dust fractions with a size below 100 m. The results obtained can be used for optimizing the technological programs of CNC milling machines, thus, reducing the occupational exposure to harmful wood dust emissions in the wood-processing industry.
URL	Link na plný text
Kategória publikačnej činnosti	ADC
Číslo archívnej kópie	50464
Kategória ohlasu	MRACKOVA, Eva - SCHMIDTOVA, Jarmila - MARKOVA, Iveta - JADUDOVA, Jana - TUREKOVA, Ivana - HITKA, Milos. Fire parameters of spruce (Picea abies Karst. (L.)) dust layer from different wood technologies Slovak case study. In Applied sciences (Basel). ISSN 2076-3417, 2022, vol. 12, no. 2, pp. 1-12. MADANI, M. Znižennja zapilenosti povitrja robocoji zoni na derevoobrobnikh pidprijemstvach. In Tehnogenno-ekologìčna bezpeka. ISSN 2522-1892, 2022, vol. 11, no. 1, pp. 68-73. CUI, Yunqi - YIN, Jian - CAI, Yitong - WANG, Huimin - DING, Tao - ZHU, Nanfeng. Morphological characteristics of bamboo panel milling dust derived from different average chip thicknesses. In Forests. ISSN 1999-4907, 2022, vol. 13, no. 9, pp. 1-18. KOLEDA, Pavol - KOLEDA, Peter - HRČKOVÁ, Mária - JÚDA, Martin - HORTOBÁGYI, Áron. Experimental granulometric characterization of wood particles from CNC machining of chipboard. In Applied sciences. ISSN 2076-3417, 2023, vol. 13, no. 9, pp. 1-15. LUBIS, Muhammad Adly Rahandi - PARK, Byung-Dae - KIM, Yeong-Suk - YUN, Jeonghee - SHIN, Hee Chang. Visual inspection of surface mold growth on medium-density fiberboard bonded with oxidized starch adhesives. In Wood material science and engineering. ISSN 1748-0272, 2023 vol. 18, no. 3, pp. 819-826. MUHAMMED, Musa - JAVIDANI, Mousa - HEIDARI, Majid - JAHAZI, Mohammad. Enhancing the tribological performance of tool steels for wood-processing applications : a comprehensive review. In Metals. ISSN 2075-4701, 2023, vol. 13, no. 8, pp. 1-30. WARGULA, Lukasz - WILCZYNSKI, Dominik - WIECZOREK, Bartosz - PALANDER, Teijo - GIERZ, Lukasz - NATI, Carla - SYDOR, Maciej. Characterizing sawdust fractional composition from oak parquet woodworking for briquette and pellet production. In Advances in science and technology. ISSN 2080-4075, 2023, vol. 17, no. 5, pp. 236-247. WRONKA, Anita - KOWALUK, Grzegorz. Upcycling of wood dust from particleboard recycling as a filler in lignocellulosic layered composite technology. In Materials. ISSN 1996-1944, 2023, vol. 16, no. 23, pp. 1-13.
Katal.org.	BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici
Báza dát	xpca - PUBLIKAČNÁ ČINNOSŤ
Odkazy	PERIODIKÁ-Súborný záznam periodika

Názov	Interactive political leadership
Podnázov	the role of politicians in the age of governance
Aut.údaje	Eva Sørensen
Autor	Sørensen Eva
Vyd.údaje	Oxford : Oxford University Press , 2020. - 221 s. : il., 24 cm
Vydanie	1st ed.
ISBN	978-0-19-877795-3
Poznámka	Bibliografia s. [165]-209. Register
Kľúč.slová	politické vedenie - political leadership politici - politicians vláda - government demokracia - democracy
Form.deskr.	monografie - monographies
Jazyk dok.	angličtina
Krajina	Veľká Británia
Systematika	32
	316.46:32
	32-051
	328.13
	321.7+342.34
Katal.org.	BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici
Báza dát	xkni - KNIHY
Počet ex.	1, z toho voľných 0, prezenčne 1

Názov	Leading in the age of innovations
Podnázov	change of values and approaches
Aut.údaje	Lenka Theodoulides, Gabriela Kormancová, David Cole
Autor	Theodoulides Lenka 1967- (40%) UMBEF03 - Katedra ekonomiky a manažmentu podniku
Spoluautori	Nafoussi Gabriela 1978- (30%) UMBEF03 - Katedra ekonomiky a manažmentu podniku Cole David Austin 1961- (30%) UMBEF06 - Katedra odbornej jazykovej komunikácie
Vyd.údaje	New York : Routledge , 2019. - 250 s.
Vydanie	1. vyd.
ISBN	978-0-8153-7903-4
Kľúč.slová	politické vedenie - political leadership diverzita - diversity etika - ethics inovácie - innovations
Heslá geogr.	Európa stredná a východná
Form.deskr.	monografie - monographies
Jazyk dok.	angličtina
Krajina	Spojené štáty
Systematika	334
Kategória publikačnej činnosti	AAA
Číslo archívnej kópie	45071
Katal.org.	BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici
Báza dát	xpca - PUBLIKAČNÁ ČINNOSŤ
Odkazy	(1) - PUBLIKAČNÁ ČINNOSŤ

Názov	Political Leadership in the European Union
Aut.údaje	edited by Ingeborg Tömmel and Amy Verdun
Ďalší autori	Tömmel Ingeborg (Editor) Verdun Amy (Editor)
Vyd.údaje	Abingdon, Oxon : Routledge , 2018. - 155 s. : tab., 24 cm
Vydanie	1st ed.
Edícia	Journal of European integration special issues
ISBN	978-0-8153-9561-4
Poznámka	Bibliografické odkazy. Register
Heslá korp.	Európska únia - European Union
Kľúč.slová	politické vedenie - political leadership ekonomická integrácia - hospodárska integrácia - economic integration
Jazyk dok.	angličtina
Krajina	Veľká Británia
Systematika	339.7/.9
	[339.923+327](4)
Katal.org.	BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici
Báza dát	xkni - KNIHY
Počet ex.	1, z toho voľných 0, prezenčne 1

Názov	The party politics of presidential rhetoric
Aut.údaje	Amnon Cavari
Autor	Cavari Amnon
Vyd.údaje	New York : Cambridge University Press , 2017. - xi, 237 s. : il., tab., 24 cm
Vydanie	1st ed.
ISBN	978-1-107-15003-4
Poznámka	Bibliografia s. 219-234. Bibliografické odkazy. Register
Kľúč.slová	prezidenti - presidents rétorika - rhetoric politické aspekty - political aspects politické vedenie - political leadership
Heslá geogr.	Spojené štáty americké
Form.deskr.	monografie - monographies
Jazyk dok.	angličtina
Krajina	Spojené štáty
Systematika	32-051
	808.5
	32
	316.46/.47:32
	(73)
Katal.org.	BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici
Báza dát	xkni - KNIHY
Počet ex.	1, z toho voľných 0, prezenčne 1

Názov	Efektivita rozvojovej pomoci: porovnanie Spojených štátov amerických, Nórskeho kráľovstva a Slovenskej republiky
Podnázov	diplomová práca
Aut.údaje	Martina Pallerová; školiteľ: Martina Bolečeková
Autor	Pallerová Martina
Ďalší autori	Bolečeková Martina 1977- (Školiteľ (konzultant))
Korp.	Univerzita Mateja Bela . Fakulta politických vied a medzinárodných vzťahov . Katedra medzinárodných vzťahov a diplomacie , Banská Bystrica, Slovensko
Vyd.údaje	Banská Bystrica , 2016. - 77 s.
Kľúč.slová	rozvojová pomoc - rozvojová spolupráca - development assistance - development aid efektivita rozvojovej pomoci komparácia - comparison
Jazyk dok.	slovenčina
Krajina	Slovenská republika
Systematika	332.021
Katal.org.	BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici
Báza dát	xk - Kvalifikačné práce
Počet ex.	1, z toho voľných 0, prezenčne 1

Názov	Factors affecting the granularity of wood dust particles
Aut.údaje	Alena Očkajová ... [et al.]
Autor	Očkajová Alena 1961- (40%) UMBFP07 - Katedra techniky a technológií
Spoluautori	Kučerka Martin 1980- (20%) Banski Adrián (20%) Rogozinski Tomasz (20%)
Zdroj.dok.	Trieskové a beztrieskové obrábanie dreva 2016 : zborník príspevkov z 10. medzinárodnej konferencie, 08.-10.09.2016 Zvolen. S. 137-144. - Zvolen : Technická univerzita vo Zvolene, 2016 / Delijski Nencho ; Goglia Vladimír ; Orlowski Kazimierz A. ; Rousek Miroslav ; Siklienka Mikuláš ; Barcík Štefan ; Očkajová Alena 1961- ; Trieskové a beztrieskové obrábanie dreva 2016 medzinárodná vedecká konferencia
Kľúč.slová	obrábanie dreva drevo - wood woodworking
Jazyk dok.	angličtina
Krajina	Slovenská republika
Systematika	674
Anotácia	The results of this contribution are focused on the amount of dust particles with the dimension of < 100 μm in diameter (airborne dust particles) that are produced by individual woodworking machines and they might present a potential risk to service personnel if they are not suitably eliminated from this environment. The results of the experimental measurements relating to the factors that affect the granularity of created chip in the wood and wood-based materials processing. Variables for obtaining individual characteristics of dust particles were: a kind of the processed material – coniferous, deciduous tree species, wood-based materials (mainly MDF), its physical properties – density, wood moisture, thermal wood treatment, the tool (type, diameter, angle geometry), cutting speed and feeding speed, model of cutting and chip thickness
Kategória publikačnej činnosti	AFD
Číslo archívnej kópie	36756
Kategória ohlasu	NASIR, Vahid - COOL, Julie. A review on wood machining : characterization, optimization, and monitoring of the sawing process. In Wood material science and engineering. ISSN 1748-0272, 2020, vol. 15, no. 1, pp. 1-16. ARO, Matthew D. - GEERTS, Stephen Monson - FRENCH, Suzanne - CAI, Meijun. Particle size analysis of airborne wood dust produced from sawing thermally modified wood. In European journal of wood and wood products. ISSN 0018-3768, 2019, vol. 77, no. 2, pp. 211-218. KMINIAK, Richard - DZURENDA, Ladislav. Impact of sycamore maple thermal treatment on a granulometric composition of chips obtained due to processing on a CNC machining mentre. In Sustainability. ISSN 2071-1050, 2019, vol. 11, no. 3. COOL, J. - NASIR, V. Airborne dust emission in the sawing process of Douglas-fir wood. In 24th international wood machining seminar, Corvallis, 25th-30th August 2019. Corvallis : IWMS-24, 2019. Pp. 255-262. NASIR, Vahid - COOL, Julie. Characterization, optimization, and acoustic emission monitoring of airborne dust emission during wood sawing. In International journal of advanced manufacturing technology. ISSN 0268-3768, 2020, vol. 109, no. 9-12, pp. 2365-2375. CANDELIER, Kevin - DIBDIAKOVA, Janka. A review on life cycle assessments of thermally modified wood. In Holzforschung. ISSN 0018-3830, 2021, vol. 75, no. 3, pp. 199-224. KOLEDA, Peter - BARCIK, Stefan - KORCOK, Michal - JAMBEROVA, Zuzana - CHAYEUSKI, Vadzim. Effect of technological parameters on energetic efficiency when planar milling heat-treated oak dood. In BioResources. ISSN 1930-2126, 2021, vol. 16, no. 1, pp. 515-528. BARANSKI, Jacek - DUDEK, Przemyslaw. Chip suction system in circular sawing machine : empirical research and computational fluid dynamics numerical simulations. In Acta Facultatis Xylologiae Zvolen. ISSN 1336-3824, 2021, vol. 63, no. 1, pp. 103-118. CUI, Yunqi - YIN, Jian - CAI, Yitong - WANG, Huimin - DING, Tao - ZHU, Nanfeng. Morphological characteristics of bamboo panel milling dust derived from different average chip thicknesses. In Forests. ISSN 1999-4907, 2022, vol. 13, no. 9, pp. 1-18.
Katal.org.	BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici
Báza dát	xpca - PUBLIKAČNÁ ČINNOSŤ

Názov	Particle-size distribution of dust created during sanding the modified ash wood
Aut.údaje	Tomasz Rogozinski ... [et al.]
Autor	Rogozinski Tomasz (25%)
Spoluautori	Hlásková Luďka (25%) Wieruszewski Marek (25%) Očkajová Alena 1961- (25%) UMBFP07 - Katedra techniky a technológií
Zdroj.dok.	Annals of Warsaw University of Life Sciences - SGGW : forestry and wood technology. No. 90 (2015), pp. 162-166. - Varšava : Wydawnictwo SGGW, 2015
Kľúč.slová	drevný prach wood dust brúsenie sanding
Jazyk dok.	angličtina
Krajina	Poľsko
Systematika	62
Kategória publikačnej činnosti	ADE
Číslo archívnej kópie	34073
Kategória ohlasu	KIC, Pavel - MÜLLER, Miroslav. Dust concentration in air during the MDF boards and polystyrene milling operations on CNC milling machine. In Manufacturing technology. ISSN 1213-2489, 2018, vol. 18, no. 6, pp. 923-927.
Katal.org.	BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici
Báza dát	xpca - PUBLIKAČNÁ ČINNOSŤ
Odkazy	PERIODIKÁ-Súborný záznam periodika

Výsledky vyhľadávania

Vyberte zdroj